The DS500 compressed-air system monitor from Beko Technologies is able to monitor up to 12 outputs, allowing operators to conduct regular audits on the power consumed, flow pressure, dew point and leakage, as well as other key parameters.
The outputs are not limited to Beko’s devices; they can, for example, use pulse outputs for gas metering or PT100/PT1000 or KTY temperature sensors.
The DS500 has capacity for 12 inputs, which can be analogue or digital. Operators can record, indicate and evaluate the data, enabling them to be constantly aware of running costs and assisting in spotting situations that could be troublesome without corrective action.
The data measured by the DS500 is easily transferrable to a PC via a USB stick, GSM module or Ethernet connection to suit the frequency of information required by the customer.
Some compressor data needs to be inputted relating to the type, performance, variable or fixed-speed motor. Once this is done, a range of graphical outputs are available at a glance.
Parameters/outputs
Energy cost
Compressed-air cost
Leakage cost
Compressor load/unload times
Specific energy of the compressor
Cost of 1m³ of compressed air